Quick Steps To Set Up The Lexmark Wireless Printer Without CD

Want to set up your Lexmark printer without a CD? Well, Lexmark Wireless Printer Setup is quite easy with an installation CD. But if your laptop doesn't have a CD drive or you have lost the installation CD, in that case, you need to connect your Lexmark printer to the wireless connection through the WPS button or the ethernet cable. This blog will show you some simple and easy steps to set up the Lexmark printer without installing a CD. Before proceeding with the setup, you should know the exact model of your printer and the device's operating system.

Steps to setup the Lexmark printer through the WPS button

To set up the Lexmark printer, make sure that your router supports the WPS button. If your router and Lexmark printer support the WPS button, then go through the below-mentioned steps to set up the printer:

Step 1: First of all, go to the “control panel” of the Lexmark printer and tap on the “settings” option.

Step 2: Now, press the ok button and hit the “select Network/port” option under the settings section.

Step 3: Then, click on the “wireless” option and press the ok button.

Step 4: After that, tap on the “WiFi protected setup” option and press the WPS button on the WiFi home router.

Step 5: Now, move to the “settings” tab, tap on the “Network/port” option and select the wireless printer.

Step 6: Next, click on the “WPS” button and select the “start push” button method.

Step 7: Hit the WPS button on the modem and click on the WiFi icon. 

Step 8: Finally, your Lexmark printer is connected to the WiFi network.

Steps to connect the Lexmark printer to WiFi without CD

Here are the simple steps to connect the Lexmark printer to the WiFi network without CD:

Step 1: To begin with, connect your Lexmark printer and the computer to the same wireless network.

Step 2: Now, move to the control panel on your computer.

Step 3: On the next screen, tap on the “add a new device” option.

Step 4: Then, select your Lexmark printer and make sure that it is in discoverable mode.

Step 5: Wait for a couple of moments until your Lexmark printer is detached and displayed on the screen.

Step 6: In the next step, you can rename your printer.

Step 7: Now, hit the “proceed” button to install your Lexmark printer driver.

Step 8: In order to install the Lexmark printer driver, go to the official website of Lexmark, choose the relevant printer model from the list, and tap on the download button to start the downloading of the Lexmark printer driver.

Step 9: Once you are done with the installation of the Lexmark printer driver, reboot your computer.

These are the simple steps to set up the Lexmark printer without a CD. Follow the steps and complete the Lexmark Wireless Printer Setup like a pro.