Know Easy Instructions For Canon MG3620 Setup

Have you purchased a new Canon MG3620 printer? Do you want to set up your printer for the first time? Unable to connect your Canon MG3620  to a WiFi connection? Thinking about how to do it? If so, then don’t panic! You have reached the right spot. In this blog, we have shared step-by-step simple guidelines for Canon MG3620 setup on your device whatever you are using. Scroll down and check out the steps for the wireless setup of the Canon MG3620 printer.

How to Connect Canon MG3620 Printer to WiFi?

There are various methods through which you can easily connect the Canon MG3620 printer to the WiFi connection. In this section, you will get to know the various methods for the Canon MG3620 wireless printer setup. 

Method 1: Through Control Panel

Follow the below instructions to connect the Canon MG3620 printer to the WiFi connection through the control panel:

Step 1: The first step is to switch on your Canon MG3620 printer.

Step 2: After that, press the “Color” button. Thereafter, press the WiFi button on your printer.

Step 3: Now, you have to wait for some time until your WiFi is turned on. Once your WiFi is turned on then the LED light located next to the WiFi button will start flashing.

Step 4: In the next step, you have to install the appropriate printer drivers and software on your computer or laptop to set up the wireless connection.

Step 5: Insert the CD in the CD drive to start the setting process of your printer. With this, the setup program will starts.

Step 6: Once you insert the disk, the printer setup process will start automatically. 

Step 7: When the printer setup is installed successfully, a confirmation message will display on your screen. 

Step 8: At last, tap on the close button to exit. 

Method 2: Using WPS Push Button 

Look at the below steps to connect your Canon MG3620 printer to the wireless connection through the WPS push button:

Step 1: The first step is to press the WiFi button to start the setup process. After that, wait for some time until the LED light starts flashing.

Step 2: Thereafter, press the Start button and then the WiFi button on your device.

Step 3: You need to ensure that the WiFi LED light blinks fast and the light flashing on your device indicates ON status on it. 

Step 4: Once the WiFi LED light is blinking continuously on your device then go to the wireless router. 

Step 5: Next, press and hold the WPS push button on your wireless router for at least two minutes.

Step 6: When the LED light starts blinking on your device then it means that your printer is connected to the WiFi connection successfully. 

Method 3: Using WPS PIN Code

Through WPS Pin code, you can easily connect your Canon MG3620 printer with an internet connection. Follow the below steps to connect the Canon MG3620 printer to WiFi using the WPS PIN code: 

Step 1: Firstly, press and hold the WiFi button on your Canon MG3620 printer. Release the button when the power LED light on your device will start blinking.

Step 2: After that, press the WiFi button if you want to print the information related to the wireless connection setup such as PIN code. 

Step 3: Thereafter, press the Stop button. You need to hold the Stop button until the alarm light starts flashing 16 times.

Step 4: Next, set the WPS Pin code from the printer network configuration web page to the WiFi home router.

Step 5: Ensure that the WiFi light on your printer is lit. 

That’s it! We hope that by following the above instructions, you are able to complete the Canon MG3620 Setup on your device without any hassle.