Simple User Manual Guide for Canon MG3620 Setup

Have you purchased a new Canon MG3620 printer for home or office? Are you looking for the simple steps for the Canon MG3620 setup? If your answer for the above questions is yes then you have visited the right spot. In this blog, we have discussed the simplest way for the Canon MG3620 wireless setup on your device. With these steps, you can easily connect the Canon MG3620 printer to Windows and Mac devices after installing the compatible printer driver in your system. You just need to go to the wireless setup wizard to establish the connection between the Canon printer and wireless network. Let’s move forward with no further delay to set up the Canon MG3620 wireless printer. 

Steps for Canon Pixma MG3620 Unboxing Setup

Follow the below steps for unboxing the Canon Pixma MG3620 printer:

Step 1: Firstly, open the carton of your printer and take the small cardboard box out from the printer box.

Step 2: Make sure the printer cardboard box contains all the accessories such as power cable, ink cartridges, Ethernet cable, CD and others. 

Step 3: Peel off the packing material from your Canon Pixma MG3620 printer. Also remove the protective tape from all around the printer. 

Step 4: Once you remove the plastic bag and packing material, place your printer on a dirt-free and smooth surface. 

Step 5: Also, remove the packing material and tapes from the accessories that come along with your printer. 

Step 6: Take the power cable out from the box and plug-in it in the power port of your Canon printer and the electrical outlet. 

Step 7: After that, connect the power cable to your Canon printer directly. In case, your printer is connected to the power source using a power strip to remove it and establish a direct power connection. 

Step 8: Remove the tapes and packing material from the inner and outer surface of the print cartridge. 

Step 9: Take out the print cartridge from the packing box. Remove the tapes that cover the electrical contacts. Insert the ink cartridge properly into the printer and close the access door. 

By following the above steps, you can easily complete the unboxing and Canon MG3620 setup.

Instructions for Canon MG3620 Setup Wirelessly without Router

Follow the below mentioned instructions for the Canon MG3620 setup wirelessly on your device without router:

Step 1:  The first step is to enable the WiFi direct option on your Canon MG3620 printer. After that, connect your device to the printer and try to print the documents.

Step 2: Make sure that your Canon printer is switched on. 

Step 3: Press and hold the WiFi button on your printer from the control panel. Release the WiFi button when the wireless light starts flashing.

Step 4: Next, press the Black button on your device followed by the WiFi button.

Step 5: Press the WiFi button continuously until the direct light starts blinking on your device.

Step 6: When the Direct light starts to flash, you need to press the Black or Color button.

Step 7: In the next step, connect your device to the wireless network.

Step 8: Now, you have to select the Canon MG3620 printer from the installed list of devices.

Step 9: Enter the password in the appropriate field. Tap on the Ok button to proceed further.

Step 10: With the above steps, your computer and Canon MG3620 printer are connected successfully to the wireless network. 

Step 11: Before starting the printing process, ensure that you have installed the printer driver on your system successfully.

Step 12: Print the document to check its performance. 

Congrats! With the above-written guidelines, you can easily complete the Canon MG3620 Setup on your device without facing any difficulty.